Luxflacon
My Projects

DESIGN STUDY · DG-009

Aube 09 Peach & Rose Gold

Peach colour softens a precise square silhouette. The clear heel and transparent cap preserve the outline of the glass, while the rose-gold A sits above understated brown lettering.

Discuss this designAll designs
  • Translucent peach lacquer
  • Two-colour screen print
  • Clear crystal-style cap
Aube 09 peach square perfume bottle with a clear rectangular faceted cap, rose-gold collar and A monogram above brown lettering

DESIGN DIRECTION

Let warm colour meet clear edges.

Aube 09 keeps the front open, without a label or enclosing frame. The monogram introduces a metallic accent; the name and small inscriptions stay dark for contrast. The transparent rectangular cap echoes the broad face below.

Soft peach

Transparent exterior lacquer on the body; leave the thick heel clear and review the colour with the intended fill.

Warm brown

A non-metallic print colour for the name, fragrance designation and capacity line.

Rose gold

Metallic ink for the A, coordinated visually with the finished pump collar.

BOTTLE & COMPONENTS

A broad square face for controlled registration.

Use the Crystal Square Atomizer as the silhouette reference. Confirm the front printing land, bevel clearances and cap insert dimensions from the selected component drawings.

Clear square reference perfume bottle with a transparent rectangular cap and gold collar
View the reference bottle
Glass and fill
Square front, bevelled shoulders and a thick clear heel. Confirm neck finish and nominal fill before approving the 100 ml artwork.
Two-colour artwork
Separate the metallic A from the brown lettering. Keep fine strokes clear of bevels and mould seams.
Coating boundary
Define a repeatable mask line above the clear heel; protect the mouth and sealing surfaces.
Clear closure
Faceted transparent outer cap, retention insert and rose-gold collar. Review clarity, assembly stress and actuator clearance.

PROPOSED DECORATION ROUTE

Balance peach transparency with readable detail.

Develop coating and both ink colours on the same bottle, then approve the complete closure alongside them.

  1. 01

    Set the front layout

    Position the A, name and capacity within the flat face using a repeatable datum.

    Approval point

    Approve artwork separations and bevel clearances.

  2. 02

    Prepare and mask

    Clean the glass and mask the heel, mouth and sealing surfaces.

    Approval point

    Approve a continuous, level colour boundary.

  3. 03

    Apply peach lacquer

    Control exterior coverage across shoulders and corners; cure to the qualified coating process.

    Approval point

    Review filled and empty colour samples.

  4. 04

    Print the identity

    Screen print the brown text and rose-gold metallic initial with compatible inks.

    Approval point

    Check registration, fine strokes and ink coverage.

  5. 05

    Match the clear cap

    Assemble the insert and coordinate the collar with the metallic print.

    Approval point

    Inspect transparency, fit and removal force.

  6. 06

    Approve the assembled pack

    Fit the pump and protect the cap edges and clear heel in the pack insert.

    Approval point

    Test spray, leakage and handling marks.

SAMPLING & APPROVAL

Approve the appearance. Validate the complete pack.

Colour and clear heel

Check peach hue, transparency and mask-line consistency under agreed lighting.

Metallic and brown inks

Assess both inks for adhesion, rubbing and fragrance exposure on the cured lacquer.

Transparent cap

Inspect stress marks, clarity and repeated removal; validate glass support during transport.

Bring a softer tone to a precise silhouette.

Develop the peach finish, rose-gold initial and clear cap around your fragrance identity.

Discuss this designConfigure a bottle